It’s quite frustrating when your iPhone home button suddenly stops working! No matter how careful you are about keeping your iPhone safe and intact, there is still a chance your home button will eventually suffer the effects of normal wear and tear. Well, you don’t have to feel panic about this problem. There is good news: A lot of home button issues can be fixed at home. So this article is about how to solve home button not working issue.
How to Solve Home Button Not Working Issue?
Method 1: Reboot your iPhone Device
The first troubleshooting step is to turn your iPhone off and back on again. Performing this on your iPhone device can help you fix some system or some software glitches and can bring your iPhone device to work normally.
Method 2: Calibrate your Home Button
If you are lucky enough that your home button is not responding due to software glitch, you can calibrate your home button. Open up a stock app, like the Clock. Hold down the sleep button until “Slide to power off” appears. When it does, let go of the sleep button and hold down the home button. After about 5-10 seconds, the app will close.
If this solved your problem, then congratulation you’ve fixed your iPhone. If not, try to restore your iPhone before continuing to the next method.
Method 3: Clean Your Home Button
Any dust or any sweat can make your home button unresponsive. Because of this, you might want to try to clean your home button. You can use an air duster for you to get rid of the dust that is unnoticeably stuck on your iPhone device. You can also try using a 98% – 99% isopropyl alcohol to clean your home button, which can be bought from hardware stores.
Wipe clean, and wait about 10-15 minutes before checking to see if that did the trick.
Method 4: Activate Assistive Touch
If the previous three methods do not work, it sounds like perhaps you have a completely defunct home button. In this case, your home button’s connectors may have been misaligned and would require professional repair.
The good news is, you can still use your phone using its Assistive Touch. Normally, this is used as an accessibility option, but it’s also a common solution for those non-functioning home buttons.
You can enable it by following these steps: go to Settings > General > Accessibility > Assistive Touch. Turn Assistive Touch on, and you’ll see a small circle appear on screen.